The Clocks Screen

(Hint: Run WorldClock Lite and refer to the screen while reading this documentation page
from a printout.)
__________________________________________________________________________

The screen that automatically appears when you run WorldClock Lite is the 
Clocks screen.  In addition to the map with day/night pattern and the locations 
of the sun and moon, five clocks are displayed.

The clocks were set prior to distribution to Honolulu, Los Angeles, Denver, 
Chicago, and New York.  You may change the "location" of any clock by 
clicking once on the clock.  This brings up a scrolling list of over 190 world-
wide locations.  Click on the location of your choice, and then click the Select 
button (or double-click on the location).  The clock will display the time at the 
chosen location, including correction for daylight savings time if it is in effect 
at that location.

The brightness of each clock face indicates the daylight, twilight, or nighttime 
condition at the respective location.  Nighttime is shown with a black clock face, 
twilight with varying shades of gray.  Sunrise and sunset is shown with red and
orange hues on a color screen.

STD indicates that standard time is in effect at the clock's location.  DLT indi-
cates that daylight savings time (or an equivalent) is in use.  Each clock shows 
the great-circle distance in statute miles from the computer's location (displayed
at the top of the window) to the clock's location.

The location of each clock is displayed in a small rectangle on the map.  The 
computer's location on the map is marked with a small circle and cross (red on 
a color display).

Click once on the digital clock panel to change to 24-hour time.   Click again for
Universal Time.  Click again to return to AM/PM display.